70
Operation
Remote Control Using iControl
Remote Control Using iControl
The KMX-3901-IN input cards and KMX-3901-OUT output cards may be controlled by using
Grass Valley’s iControl version 4.43 or later. The KMX-3901-IN-IP input/output cards require
iControl version 7.10 or later. This section describes the three control panels associated with
the Kaleido-Modular-X’s input and output cards and their use. Refer to the iControl User’s
Guide for information about setting up and operating iControl.
In iControl Navigator, iControl Web, or iControl Solo, double-click the icon for a Kaleido-
Modular-X input or output card (KMX-3901-OUT, KMX-3901-IN-8-D, KMX-3901-IN-16-D, or
KMX-3901-IN-16-Q) to open the associated control panel.
Kaleido-Modular-X Service Control Panels in iControl
The card label (
KMX-IN-16-D,
and
KMX-OUT
in the examples below) and the slot number
where the card is installed in the Densité frame are indicated in the window’s title bar.
The service control panel for
KMX-3901-IN input cards
only offers information.
Service control panel for a KMX-3901-IN input card
on page 78 for more information.
