50
Installation
Replacing Power Supply Modules
To install or change a power supply module in a Densité 3+ FR4 frame
1 Open the front door of the frame (see
2 Lift up the latching tab in the front center of the supply.
3 Slide the power supply out of the frame by pulling on the bracket on the bottom right
of the supply.
4 Slide the new power supply module into the slot, and push it gently into position to
seat the connectors.
There is no guiding slot: the supply base sits on the floor of the frame. The latch clicks
into position once the supply is properly seated.
5 Close the front door of the frame (see
