45
Kaleido-Modular-X
Hardware Description & Installation Manual
4K UHD Prescaler Configuration and Upgrade
Converting a KMX-3901-IN-16-Q Input Card to a 4K UHD Prescaler
To configure a KMX-3901-IN-16-Q input card as a 4K UHD prescaler
1 Press the Select button on the front edge of the
KMX-3901-IN-16-Q input card
you wish
to configure.
The Status LED on the selected card flashes orange, and the associated control menu
appears on the LCD display of the Densité frame’s local control panel.
2 On the local control panel, press the [–] button.
CONFIG appears on the LCD display.
3 Press the SEL button.
4K UHD PRESCALER appears on the LCD display.
4 Press the SEL button.
5 Press the [+] or [–] buttons, if needed, until ENABLE appears on the LCD display.
6 Press the SEL button.
ENABLE appears on the top line of the LCD display, and then, after a few seconds, a
message appears on the second line to let you know that the card will restart in
20 seconds.
7 After the card has restarted, notice that the SDI LEDs 3, 4, 7, 8, 11, 12, 15, and 16 are not
lit.
This indicates that the card is now configured as a 4K UHD prescaler.
Select button
Status LED
