25
Kaleido-Modular-X
Hardware Description & Installation Manual
Standard wiring between multiviewer and devices wired to SMPTE “master” specification (e.g. Philips
Jupiter router control system, Grass Valley Presmaster PCS)
For more information about the serial ports’ specifications, see
, on page 93. For
more information about the RS-422 serial connections, see the “Serial Connections” section
in the
Routers
chapter of the Kaleido-X User’s Manual.
KMX-3901-OUT-D-3+SRP rear panel connections
The KMX-3901-OUT-D-3+SRP rear panel covers 1 slot, and its layout includes 2 HDMI
outputs, 2 HD-SDI monitoring outputs, 1 Ethernet connector, 2 FlexBridge inputs, and 1 SFP
cages. In the case of the HDMI outputs, and HD-SDI monitoring outputs, in each pair, the
output associated with the second head is
NOT
enabled if your output card is the single-
head model (KMX-3901-OUT-S). A software option is available to enable the second head.
KMX-3901-OUT-D-3+SRP rear panel
Note:
The two RS-422 ports on the multiviewer side have no ground pin.
Using the appropriate DE-9S-to-RJ-45 adapter, an external device should be
able to communicate with a multiviewer despite the lack of a ground.
Notes
• The single rear connector panel KMX-3901-OUT-D-3+SRP does not have a
serial port. To support a serial device, your Kaleido-Modular-X system must
have at least one output card with a double rear connector panel (KMX-
3901-OUT-D-3DRP).
• The single rear connector panel does not support analog audio outputs.
Audio monitoring is available at the SDI and HDMI outputs only.
Pinout of an RS-422
port’s RJ45 connector
on the multiviewer
RJ45
DE-9 male DE-9 female
Crossover
adapter pinout (Grass
Valley part no. 1792-3700-100)
Pinout of RS-422
connector on SMPTE
master
device
