Belarus 1221.2, Operator'S Manual

Page: 208 / 295

BELARUS- 1221.2/1221В.2/1221.3 Aggregation
207
On rear left part of the machines such as trailers or semitrailers there shall be a sign of
limitation of the maximum speed of the MTA. The hole with the diameter of 24 mm in the
both cheeks of the lifting device serve as a place of attaching the safety chains (ropes) on
the tractor (the fasteners are included in the standard equipment of the technical mean to
be aggregated).
The tractor aggregation with the train (t semi-t trailer) is only allowed on
dry roads with hard pavement and slopes not exceeding 4%. When driving to the public
roads, the overall dimensions of the MTA shall not exceed: width – 2.6 m and height – 3.2
m.
In case of deviations from the provided norms, the consultation with the state authorities
responsible for the traffic safety is required.
IMPORTANT! When performing the hauling operations on the roads with hard
pavements, increase the pressure in the tyres to the maximum value allowed by the
manufacturer.
To connect the signaling equipment of the facilities to be aggregated, the tractor is pro-
vided with a receptacle with a socket for supplying the instruments of the aggregated ma-
chine.
When driving the tractor on the public roads follow the following requirements:
1) The forward motion shall be only performed with the flashlight beacon switched on;
2) The reverse motion on the public roads is not allowed, because the light signalling de-
vices are only oriented to the forward motion;
3) Using the working lights is not allowed because it causes the dazzling of other traffic
participants;
4) The motion of the tractor aggregated with agricultural machines with the vessels filled
(process material – fertilizers, seeds, etc.) on public roads is prohibited.
3.12.2 On the intended use of the tractor and machines within the MTA
• The tractor and machines either separately or within the MTA should be only used
in accordance with their purpose as specified in the operating documentation for them, un-
der the conditions and in the modes specified by the manufacturer. Using the technical
means including of the tractor for any other purposes is considered to be unintended use.
The manufacturer shall bear no responsibility for damages caused due to such use of the
aggregate. In this case, the total responsibility shall be born by the user.
• The concept of “ intended use ” includes also meeting the conditions of the operation,
maintenance and care specified by the manufacturer. The use, maintenance and care of
the tractor and machines shall be carried out by the personnel appointed for this purpose
and informed duly about the potential hazard.
• Observe the existing accident prevention prescriptions, such as commonly known
safety regulations, medical recommendations for labour protection and road regulations.
• Any unauthorized modification of the construction of the aggregate releases the
manufacturer from the responsibility for the damages caused by such modification. It is
equally applied to the cases where faulty units have been improperly dismantled or re-
paired, the tractors or machines without full standard equipment or equipped otherwise
than it is provided by the technical specifications have been used as well as where the