manualshive.com logo in svg

Beisler 1280-7, Operating Instructions Manual, Page: 89 / 214

Share
Download
Beisler 1280-7 Operating Instructions Manual Download Page 89

Programming Commander Pro

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

87

4. Next page (4)

All information related to the symbol is displayed.

The symbols are listed and explained (3) in the table below.

Icon

Menu item and explanation

1.5.2 Copyright

Dürkopp Adler GmbH 

1.5.3 Software Version

Display of the software version for the touch panel and the machine 
control.

1.5.4 Software Licenses

Software license information.

1.5.5

 

Counter

Counts the number of cycles/programs since the initial installation of 
the machine.

 Machine life time counter: This counter cannot be reset.

1.5.6 Control

Control unit type and its serial number

1.5.7 Control panel Info

Show the information of the panel.

1.5.8 Machine

Show the information of the machine.

Summary of Contents for 1280-7























































































































































































































Reviews:

No comments