Beisler 1280-7 Operating Instructions Manual Download Page 144

Page: 144 / 214

Programming Commander Pro

142

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

11. In seam section 1 (1), press and hold the numerical value for the

Reduced Speed

(8).



The integrated keyboard opens.

12. Enter the desired

Speed

(9) in the active field.

13. Press



The numerical value is stored, and the display returns to the previous
user interface.

14. Briefly press the

differential bottom feed increment

value

(3).



The integrated keyboard opens.

15. Enter the desired

differential bottom feed increment

value

(3) in the active field.

16. Press



The numerical value is stored, and the display returns to the previous
user interface.

17. Repeat the steps 1-16 for each

seam section

1-5 (1).



The parameters can be adjusted separately for each

seam

section

1-5 (1).



It is possible for each

seam section

1-5 (1) to turn the

differen-

tial bottom feed increment value

(3) ON/OFF separately

via

(11).

18. Press on the symbol



This opens the program parameters page.

Summary of Contents for 1280-7























































































































































































































Search results

Summary of Contents for 1280-7

Reviews:

Beisler 1280-7, Operating Instructions Manual, Page: 144 / 214

Search results

Summary of Contents for 1280-7

Reviews: