manualshive.com logo in svg

Beisler 1280-7, Operating Instructions Manual, Page: 162 / 214

Share
Download
Beisler 1280-7 Operating Instructions Manual Download Page 162

Programming Commander Pro

160

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

Important

Programs cannot be imported or exported by the 

Default User

. This 

process requires that the user be logged in as a 

Technician

 (

p. 111

).

A USB key is used to transfer and store the machine software. It is recom-
mended to use a USB key that is compatible and was purchased from 
Dürkopp Adler.

The USB key makes it possible to transfer program and parameter data to 
other machines as well.

5.17.1 Exporting data

To export data:

1. Connect the USB key at the control panel.

2. Press the symbol

 to bring up the navigation pane.

This opens the navigation user interface.

Important

This process requires that the user be logged in as a 

Technician

 

(

p. 111

).

Fig. 117: 

Exporting data (1)

3. Press 

Settings

 (1).

This opens the Settings user interface.

(1) - Settings

①

Summary of Contents for 1280-7























































































































































































































Reviews:

No comments