manualshive.com logo in svg

Beisler 1280-7, Operating Instructions Manual, Page: 158 / 214

Share
Download
Beisler 1280-7 Operating Instructions Manual Download Page 158

Programming Commander Pro

156

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

5.15.5 Program position

The order of the programs in a sequence can be moved quickly up/down.

Fig. 114: Program position

To move a program:

1. Select the program (1) you wish to move.

The program (1) is activated.

2. Perform a long press on the program (1).

The program (2) detaches from the list.

3. Use your finger to drag the program (2) up/down.
4. Release your finger at the desired position.

The program (2) settles in at the new position.

5.15.6 Sequence search

When on the 

Sequence Programming

 user interface, the user can 

search for specific sequence numbers or sequence names.

To access the function Sequence search.

1. Press the symbol

 to bring up the navigation pane.

This calls up the user interface with a search field in the sequence list, 
an overview of the program sequence and an integrated keyboard.

•  You can use the keyboard to enter a sequence number or the 

sequence number.

• You can select a sequence directly by scrolling. 

The sequence appears and is highlighted in blue.

2. Press 

Close

.

3. Exit sequence search with a press of the 

 

symbol

. 

The user interface 

Sequence Programming

 appears (

p. 150

).

(1) - Program

(2) - Program

②

①

Summary of Contents for 1280-7























































































































































































































Reviews:

No comments