manualshive.com logo in svg

Beisler 1280-7, Operating Instructions Manual, Page: 191 / 214

Share
Download
Beisler 1280-7 Operating Instructions Manual Download Page 191

Setup

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

189

Fig. 150: Assembling the alternating stacker (3)

7. Feed the black and blue pneumatic hoses (12+13) through the bar (15) 

in arrow direction.

8. Properly route the pneumatic hoses upwards on the stand (17) and 

secure them carefully using clips/cable ties.
• Secure the black pneumatic hose (14) towards the left
• Secure the blue pneumatic hose (16) towards the right

Fig. 151: Assembling the alternating stacker (4)

9. Fit the black pneumatic hose (12) on the pneumatic valve (18).
10. Fit the blue pneumatic hose (13) on the pneumatic valve (19).

(12)  - Black pneumatic hose
(13)  - Blue pneumatic hose
(14) - Black pneumatic hose secured

(15) - Bar
(16) - Blue pneumatic hose secured
(17) - Stand 

⑫

⑭

⑮

⑯

⑬

⑰

(12)  - Black pneumatic hose
(13)  - Blue pneumatic hose

(18) - Pneumatic valve
(19) - Pneumatic valve

⑬

⑲

⑱

⑫

Summary of Contents for 1280-7























































































































































































































Reviews:

No comments