manualshive.com logo in svg

Beisler 1280-7, Operating Instructions Manual, Page: 178 / 214

Share
Download
Beisler 1280-7 Operating Instructions Manual Download Page 178

Maintenance

176

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

6.2 Lubricating

The machine is equipped with a central lubrication system. The bearings 
are supplied from the oil reservoir.

Information on refilling and the specification of the oil used is provided in 
the separately included operating Instructions of the sewing head manu-
facturer (

Operating Instructions Machine Head

).

• Mobile Velcocite Oil No10 

CAUTION

Risk of injury from contact with oil!

Oil can cause a rash if it comes into contact with 
skin.

Avoid skin contact with oil.
If oil has come into contact with your skin, wash 
the affected areas thoroughly.

NOTICE

Property damage from incorrect oil!

Incorrect oil types can result in damage to the machine.

Only use oil that complies with the data in the instructions.

CAUTION

Risk of environmental damage from oil!

Oil is a pollutant and must not enter the sewage 
system or the soil.

Carefully collect up used oil.
Dispose of used oil and oily machine parts in 
accordance with national regulations.

Summary of Contents for 1280-7























































































































































































































Reviews:

No comments