Operation
42
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
4.13.3 Operating the alternating stacker
Fig. 32: Operating the alternating stacker (1)
On the alternating stacker (1), the finished sewing pieces are stacked sep-
arately - either sorted by right and left sewing pieces or for large storage
of several bundles. For this purpose, the alternating stacker (1) moves
back and forth in arrow direction along the track (5) on its delivery table (3).
The delivery table (3) will change positions in arrow direction depending
on the programming:
• after every seam
• after every sequence
• remains in one position (2) (inactive)
As soon as the sewing piece’s center of gravity is shifted over the edge
of the sewing table (7) by the roll-out device (8), the stacking clamp (6)
extends and fixes the sewing piece in place at the sliding edge (4) of the
delivery table (3). Additional blowing nozzles on the stacking clamp (6)
ensure that the sewing pieces are cleanly deposited via the delivery
table (3) of the alternating stacker (1).
(1) - Alternating stacker
(2) - one site/position
(3) - Delivery table
(4) - Sliding edge
(5) - Track
(6) - Stacking clamp
(7) - Sewing table
(8) - Roll-out device
④
⑥
⑦
⑤
①
②
⑧
③
②