Operation
Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023
27
Adjusting the travel path in sewing direction
To adjust the travel path in sewing direction (13):
1. Loosen the screw (12) in the stop (11).
2. Adjust the contour guide (8) in the area of the linear guide (10).
To limit the travel path of the contour guide (8) in sewing direction.
3. Slide and adjust the stop (11) on the linear guide (10).
4. Tighten the screw (12) in the stop (11).
4.7.2
Operating the contour guide
Fig. 16: Operating the contour guide
You can open and change the setting parameters (3) and the modes for
the contour guide (6) easily using the quick access icons (2) on the control
panel found on the main page.
To operate the contour guide:
1. Briefly press the button
Contour guide
(1) once.
The contour guide switches ON/OFF.
2. Perform a long press on the button
Contour guide
(1).
The window for the setting parameters (4) opens.
(1) - Button Contour guide
(2) - Quick access icons
(3) - Setting parameters Mode of contour
guide
(4) - Setting parameters
(5) - selected mode
(6) - Modes for the contour guide
②
①
③ ④ ⑤
⑥