manualshive.com logo in svg

Beisler 1280-7, Operating Instructions Manual, Page: 168 / 214

Share
Download
Beisler 1280-7 Operating Instructions Manual Download Page 168

Programming Commander Pro

166

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

Fig. 127: 

Importing data (5)

9. Press 

Next

(9).

The import process continues.

In each selected application file (5):
• Program (10): select one file/multiple files (16)
• Sequence (15): select one file/multiple files (16)
• Global Parameters: press 

Import

(17)

• Machine Configuration: press 

Import

 (17)

• Log files: press 

Import

(17)

• Customer Multimedia: select one file/multiple files (16)
• Vendor Multimedia: select one file/multiple files (16)

10. Select and activate (13) one / multiple files (16).

• The 

Select All

 (12) option is used to activate (13) all files (16) 

contained in the window.

• You can set individual files (16) to active/inactive.

11. Press 

Back

 (11).

The display returns to the previous user interface.

12. Press 

Import

 (17).

A new window (18) opens.

(10) - Application file Program
(11) - Back
(12) - Select All
(13) - Activate

(14) - Next page
(15) - Application file Sequence
(16) - File
(17) - Import

⑪

⑭

⑰

⑯

⑩

⑬

⑫

⑮

Summary of Contents for 1280-7























































































































































































































Reviews:

No comments