manualshive.com logo in svg

Beisler 1280-7, Operating Instructions Manual, Page: 160 / 214

Share
Download
Beisler 1280-7 Operating Instructions Manual Download Page 160

Programming Commander Pro

158

Operating Instructions 1280-7/1281-7 - 00.0 - 01/2023

To access the configuration of the quick access icons:

1. Call up the user interface 

Sequence Programming

.

• Use the status bar on the main page to select the tile Sequence name 

(

p. 150

).

• Via the navigation menu (

p. 150

).

2. On the user interface 

Sequence Programming, 

press on the 

symbol

.

The user interface for the configuration of the 

Quick Access 

Icons

 opens.

Fig. 115: Configuration of the quick access icons (1)

Parameters that have not been selected in the machine configuration or 
that are inactive will not be shown as a tile on the main screen. The red tile 
will be shaded red (1) on the user interface 

Quick Access Icons

.

If dragged and dropped in the bottom bar (2), the red shaded tile (1) will 
be 

set to invisible

 for the user.

(1) - Tile shaded red

(2) - Bottom bar

①

②

Summary of Contents for 1280-7























































































































































































































Reviews:

No comments