Beam ECG, Operating Manual

Page: 71 / 76

71
Beam®, Operating Manual, Rev. 4.6.1 01/2016, GmbH
8. Appendix
8.1 EMC Guidelines and Manufacturer Statement
Guidelines and Manufacturer Statement – Electromagnetic Emission
The Loop-/Event Recorder Beam
®
is intended for operation in the following environment.
The customer or the user of the Loop-/Event Recorders Beam
®
should ensure that it is
used in such an environment.
Measurement of Emitted
Interferences
Correspondence Electromagnetic Environment Guideline
HF Emitted Interferences
according to CISPR 11
Group 1 The Loop-/Event Recorder Beam
®
uses
HF energy exclusively for its internal
functions. Therefore its HF emission is
very low and it is unlikely that electronic
devices in its neighbourhood will
experience interference.
HF Emitted Interferences
according to CISPR 11
Class B The Loop/Event Recorder Beam
®
is appropriate for other facilities
than the residential area and those,
which are directly connected to a
public power supply, which provides
power to buildings that are also used
residentially.
Guidelines and Manufacturer Statement – Electromagnetic Immunity to Interferences
The Loop-/Event Recorder Beam
®
is intended for the operation in the following referred to
environment. The customer or the user of the Loop-/Event Recorders Beam
®
should ensure
that it is used in such an environment.
Test for Immunity to
Interference
IEC 60601-1-Test
Level
Correspondence
Level
Electromagnetic
Environment Guidelines
Discharge of static
electricity according
to IEC 61000-4-2
+- 6 kV contact
discharge
+- 8 kV air
discharge
+- 6 kV contact
discharge
+- 8 kV air discharge
Floor surfaces should
be made of wood or
concrete or have tiles.
If the floor is set with
synthetic material the
relative humidity must
be at a minimum of
30%.
Magnetic Field at
a power frequency
(50/60 Hz) according
to IEC 61000-4-8
3 A/m 3 A/m Magnetic fields at
the network frequen-
cy should correspond
to the typical values,
which are found in
business and hospital
environments.