Beam ECG Operating Manual Download Page 22

Page: 22 / 76

Beam®, Operating Manual, Rev. 4.6.1 01/2016, GmbH

Hypertension-Management-Software Client-Server

The installation wizard appears.

►

Follow the instructions on the screen.

Install Bluetooth Drivers
Note:

Please only plug the Bluetooth-Adapter into the computer

after

the software

installation or when you are prompted to do so.
For the Bluetooth-Adapter DIGITUS (usable from Windows XP SP2 and higher)

driver

software is needed.

►

In the installation menu click on

Bluetooth drivers

►

Follow the instructions on the screen.

►

In some systems, the computer first needs to be made viewable in the

Bluetooth properties. For this purpose you will need to open the Bluetooth

properties after the installation and mark the checkbox as shown here in the

image.

Install USB Drivers
Note

: Please connect the USB-Adapter (USB-Stick or cable with USB-interface)

only

after

the software has been installed on the computer.

►

In the installation menu click on

USB cable drivers

►

Follow the instructions on the screen.

The software installation is now finished.

4.2.3 Installation for Macintosh

OS 10.4 and newer

Procedure:

1) Install application from the CD-ROM.
2) Plug USB adapter and/or Bluetooth adapter into the computer.

Install application from the CD-ROM

►

Put the provided CD into your CD-ROM driver.

The CD symbol for HMS CS appears on the screen.

►

Double-click this CD symbol for HMS CS.

The CD-ROM will open.

►

Open the directory

Mac_10-4.

Summary of Contents for ECG













































































Search results

Summary of Contents for ECG

Reviews:

Brands by name

Popular brands

Beam ECG, Operating Manual

Search results

Summary of Contents for ECG

Reviews:

Brands by name

Popular brands