Beam ECG Operating Manual Download Page 20

Page: 20 / 76

Beam®, Operating Manual, Rev. 4.6.1 01/2016, GmbH

Hypertension-Management-Software Client-Server

■

Before the recording: Prepare recording

1)  Start HMS CS
2)  Select Patient or create new
3)  Connect recorder with HMS CS
4)  Prepare recorder
5)  End HMS CS.

■

After receipt of the ECG recording:

1)  Start HMS CS
2)  Connect recorder with HMS CS
3)  Read measured values from recorder
4)  Analyse measured data
5)  End HMS CS.

4.2 Install Software

The software can communicate with the measuring device via the Bluetooth-

interface.

Important:

First install the Bluetooth-Adapter. Details can be found in this text.

Note

: Please only plug the USB-Adapter into the computer after the software instal-

lation or when you are prompted to do so.

4.2.1 System Requirements

1) Computer

■

1 GHz

■

512 MB RAM

■

100 MB Hard Disk Storage

■

1024x768 Pixel

■

Two spare USB Ports

2) Operating System

a) Windows 2000 SP4, XP, Vista
b) Mac OS X 10.4 or newer
c) Linux (with Intel-/AMD-Processor), GNU/Linux with BlueZ or Affix Bluetooth

Stack

3) Software

Java-Runtime-Environment (JRE is provided on the installation CD)

Warning: The HMS CS does not create backup copies of the patient data and

the recordings! For this a backup system is required, which backs

up the database. You will find the directory under: Settings/Database/

Data source.

Summary of Contents for ECG













































































Search results

Summary of Contents for ECG

Reviews:

Beam ECG, Operating Manual, Page: 20 / 76

Search results

Summary of Contents for ECG

Reviews: