manualshive.com logo in svg

Beam ECG, Operating Manual

Share
Download
Beam ECG Operating Manual Download Page 60

60

Beam®, Operating Manual, Rev. 4.6.1 01/2016,         GmbH

Hypertension-Management-Software Client-Server

®

4

 

►

In order to change values click in the respective drop-down field on the 

desired information.

 

►

Click on 

.

The window disappears.

4.13.8 Options

Specify the default process for the following items:

 

■

Mean value calculation (using all individual values or hourly mean values) 

(

only for the ABDM Measuring device Mobil-O-Graph

),

 

■

Calculation of mean arterial pressure (measured or calculated MAP)  

(

only for the ABDM Measuring device Mobil-O-Graph

),

 

■

which measured value analysis will be displayed after the transfer of the 

measured values from the device to the HMS CS device (Measured Value 

table or Graph) (

only for the ABDM Measuring Device Mobil-O-Graph

),

 

■

whether the patient list will be displayed at program start or an “empty” wor-

king window appears,

 

■

whether you use Bluetooth.

 

►

In the taskbar click on 

Settings

 and then on 

Options

.

The 

Options 

window appears.

Summary of Contents for ECG













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands