manualshive.com logo in svg

Beam ECG, Operating Manual

Share
Download
Beam ECG Operating Manual Download Page 54

54

Beam®, Operating Manual, Rev. 4.6.1 01/2016,         GmbH

Hypertension-Management-Software Client-Server

®

4

4.12 GDT-Interfaces

The HMS CS offers the option to be integrated into a practice management system 

using the GDT interface. 
After the integration into the practice software (see 

4.13.9, GDT Settings

) and star-

ting the 

HMS_GDT.EXE

 in the program directory you will find a new symbol next to 

the IEM-Logo in the upper right corner:

In this mode the patient list cannot be selected. The patient, which was transferred 

from the practice software, is active. The same will, if known, be loaded from the 

database or new created.
For already known patients existing series of measurements can be displayed or 

they can be loaded directly from the practice software, if the same is accordingly 

configured.

4.12.1  Transfer result reports to the practice software

 

►

Either close the HMS CS or set the HMS CS into observation mode.

 

►

You access the observation mode by clicking on the symbol right of the IEM 

Logo. The software is then minimised and waits in the background for inco-

ming GDT data. As soon as a file is found the software starts automatically 

with the patient.

4.13  Configure Standard Values for the HMS CS

You can specify the following settings for the program:

 

■

for analysis

 

-

Blood pressure threshold, see 

4.13.5, Specify blood pressure thresholds

 

-

Calculation basics, see 

4.13.8, Options

 

■

for the user interface

 

-

Language, see 

4.13.2, Switch Language

 

-

Colours, see 

4.13.7, Specify colours for curves and background for analy-

sis

 

-

Which window appears after program start, see 

4.13.8, Options

 

■

Technical Specifications

 

-

Interfaces basics, see 

4.13.4, Interfaces

 

-

Database, see 

4.13.1, Database

 

-

e-health Service, see 

4.13.3, e-health Service

 

-

Bluetooth, see 

4.13.8, Bluetooth

 

-

GDT-Interface, see 

4.13.9

Summary of Contents for ECG













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands