For your safety
Syscompact 2000 M pro
16 / 98
822-175-2
When connecting the device to the test object, during the preparation and while performing the
measurement, the user can come close to live parts. In so doing, there is danger of touching
the active parts directly or indirectly.
DANGER
Working in the vicinity of adjacent live parts
Danger to life or risk of injury due to electric shock.
Only use the supplied TDR connection cable with fuses.
If the TDR connection cable is used without a fuse or with another
type of fuse, the IRG 2000 must not be connected to a live cable.
During connection, implementation and monitoring of the
measurement, protection must be guaranteed for all plant parts,
either
through safety devices, insulating cover material
or by adhering to the necessary safety distances. Safety
distances depend on the voltage level, plant model, personnel
qualification and available space.
In this regard, comply with EN 50110 or the applicable standards in
your country as well as the relevant national and local accident
prevention regulations.
Working in the vicinity of open cables or faulty systems is forbidden.
Notify the responsible authorities immediately.
Use suitable personal protective equipment to protect against arcing
faults.
To assess the local conditions adequately, provide sufficient lighting
at the work place.
2.3.10 Dangers from road traffic
As tasks with systems are often carried out in the road traffic area, when assessing the
danger also consider this danger area.
When setting up the system, secure the work place and during testing and measurement
tasks, observe the country-specific road traffic regulations, applicable national work safety
and accident prevention regulations and local conditions.
Moreover, dangers for the test personnel and road users must be ruled out. Test personnel
must wear high visibility clothing that can be identified clearly by road users.
2.3.11 Guaranteeing immediate measures in an emergency
The device may be operated only if a second person with visual and audio contact to the tester
is present and is in the position to detect possible dangers and to act immediately and
properly.
2.3.12 Safety locking feature against unauthorised operation
When leaving the device or the system, press the emergency off button and remove the
key.
Keep the key in a place that is inaccessible for unauthorised persons.
Summary of Contents for Sys compact 2000 M pro
Page 97: ......
