Syscompact 2000 M pro
For your safety
822-175-2
13 / 98
DANGER
High electric voltage
Danger to life or risk of injury due to electric shock.
Before commencing work, the operator must assess the risks for the
specific working conditions. Protective measures are based on the
risk assessment and must be followed within the workplace.
Connect the system as described in this user manual.
In particular earth the test object and system properly.
Observe the warning and safety signs on the system. Always check
whether the warning signs are available and are legible.
Never put the safety devices out of operation. It is forbidden to
bypass the safety devices.
Ensure that adjacent live parts are secured against accidental
contact and flashovers with suitable covers (insulation mats,
insulating safety plates).
Cordon off all metal parts in the area of the test object terminals
(connection point and far end). Insulate and earth the metal parts to
avoid dangerous charges.
After a measurement - after switching off the device or system - the test
object can still be live with dangerous voltage.
Before lifting the safety measures, all live parts must compulsorily be
discharged, earthed and short-circuited.
DANGER
Arcing fault when establishing a connection
Danger of burn injuries and electro-ophthalmia due to arcing fault.
Use suitable personal protective equipment to protect against arcing
faults.
Cover the adjacent live parts with an insulating material.
Use only undamaged connection cables.
Secure the connection points and far end of the test object.
Use special locking devices to lock connection points.
Summary of Contents for Sys compact 2000 M pro
Page 97: ......
