
2. Pilot box
The status of the engine charge, thermo-
start and engine oil pressure is displayed
with illumination of the lamps.
It is located in the meter panel.
3. Mini fuse box
Electrical components are connected
through the fuse block to the key switch.
Fuse standards are the same as those of the
automobile fuse.
It is located under the hood.
4. Stack valve
This is associated with the rocker switch,
and it switches the route inside the manifold,
and rotates/stops the reel.
This is located on the right side of the seat.
5. Starter switch
This is used to start, run or stop the engine.
It is located at the right end of the meter
panel.
6. Headlights
The lights are turned on and off with the light
switch in the meter panel (right side).
They are located on the left and right of the
ROPS.
These lamps provide auxiliary lighting. Do
not travel or operate the machine at night or
under poor visibility.
7. Fusible link 50 A
The fusible link functions as the main fuse
for the entire electrical circuit, and as the
fuse for the charge circuit.
It is located under the hood and equipped
with a specialized fuse (50 A) cartridge.
8. Fusible link 30 A
It functions as the fuse for the engine fuel
solenoid.
It is located under the hood and equipped
with a specialized fuse (30 A) cartridge.
9. Battery
The battery supplies power to the starter at
the start of the engine, as well as to all
electrical parts.
It is located under the rear cover on the left
side of the seat.
Electrical components
About the Electrical components
Warning
When servicing electrical components, be
sure to disconnect the negative battery cable.
Safety Switches
The following safety switches are used to
prevent injuries and accidents due to operator
inattentiveness.
Related to engine starting, operation, and
rotation of the reel cutter
"Interlock System" (Page 5-30)
Seat switch
Parking brake switch
Reel rotation switch
Reel reverse switch
Proximity switch (for reel cutter rotation
stop)
Proximity switch (for traveling pedal neutral)
・
・
・
・
・
・
Electrical system
LM331
Electrical system
Page 5-5
Electrical components
Summary of Contents for LM331
