Baroness LM331, Service Manual, Page: 122 / 165

Raise the mower connecting fitting to
remove the mower unit from the main
body.
3
1
4
2
aqfz1n-028
Removal of LH Unit_003
1 Retaining snap pin
2 Round-head pin
3 Collar with hole
4 Mower connecting fitting
Removal of Mower Unit #1
Remove the retaining snap pin.
Remove the round-head pin, collar with
hole, brass washer, washer, and brass
washer.
Pull out the mower unit to remove it
from the main body.
1 5
5
4
2
3
4
aqfz1n-029
Removal of LH Unit_004
[3]
8.
[1]
[2]
[3]
1 Retaining snap pin
2 Round-head pin
3 Collar with hole
4 Brass washer
5 Washer
Installation of Mower Unit
Danger Danger
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
See "Tightening torques" (Page 3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Important
Apply a profuse amount of grease when
installing the mower connecting fitting onto the
mower arm.
For installation, reverse the removing
procedure.
LM331
Main body
Page 6-14
Removal and installation of each section