Baroness LM331, Service Manual, Page: 130 / 165

Replacement of the Tension Pulley Bearing
Wear of bearing due to frequent use and/or
damage of bearing, etc. caused by invasion of
water may prevent smooth rotation of the
tension pulley. Inspect and replace the parts
such as bearing.
Make sure that there is no wear or cracks in
the tension pulley.
Make sure that there is no wear or rust in the
bearing, and no play between the tension
lever pin and bearing.
Make sure that the tension lever or rod is not
cracked or bent.
Follow the steps below to remove the
tension lever adjuster.
Remove the lock nut.
Remove the nut.
Remove the washer A.
Remove the spring.
Remove the collar.
Remove the cotter pin.
Remove washer B.
Remove the pin.
Remove the lever adjuster.
1
2
5
9
7
6
4
3
8
2w7sr8-001
Replacement of the Tension Pulley Bearing_001
1 Lock nut
2 Nut
3 Washer A
4 Spring
5 Collar
6 Cotter pin
7 Washer B
8 Pin
9 Lever adjuster
Follow the steps below to remove the
tension lever.
Remove the tension lever bolt.
1.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
2.
[1]
Remove the spring washer and washer.
1
2
3
4
p9a4ql-001
Replacement of the Tension Pulley Bearing_002
1 Bolt
2 Spring washer
3 Washer
4 Tension lever
Follow the steps below to remove the
tension pulley from the tension lever.
Remove the nut.
Remove the spring washer.
1
2
p9a4ql-002
Replacement of the Tension Pulley Bearing_003
1 Nut
2 Spring washer
Remove the tension pulley from the
tension lever.
1
2
p9a4ql-003
Replacement of the Tension Pulley Bearing_004
[2]
3.
[1]
[2]
[3]
LM331
Main body
Page 6-22
Inspection and repair of each section