Baroness LM331, Service Manual, Page: 124 / 165

1 Brake drum
2 Plate
3 Disc spring washer
4 Special nut
Fitting of brake drum
For fitting, follow the opposite procedure of
removal.
Caution
Apply mid-strength screw lock onto the wheel
motor screws.
Caution
Refer to the tightening torque list. We assume
no responsibility for problems caused by
abnormal tightening, tightening with excessive
torque or the like of.
Disassembling and Assembling the Brake
The brake shoe can be replaced while the
brake is installed to the machine.
1
a1y6z3-001
Disassembling and Assembling the Brake_001
1 Brake shoe
Remove the upper and lower springs.
Note:
The sizes of the upper and lower springs
are different with each other.
1
1
a1y6z3-002
Disassembling and Assembling the Brake_002
1 Spring
Turn the spring holder 90 degrees while
pressing it and remove it.
Remove the spring and hold pin.
2
1
3
a1y6z3-003
Disassembling and Assembling the Brake_003
1 Spring holder
2 Spring
3 Hold pin
1.
2.
3.
LM331
Main body
Page 6-16
Inspection and repair of each section