Baroness LM331, Service Manual, Page: 121 / 165

Pull out the mower unit to remove it
from the main body.
3
2
1
5
5
4
4
aqfz1n-033
Removal of LS Unit_004
1 Retaining snap pin
2 Round-head pin
3 Collar with hole
4 Brass washer
5 Washer
Removal of LH Unit
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Raise the mower unit.
Remove the lift arm spring.
Lower the mower units.
Stop the engine.
[3]
￭
1.
2.
3.
4.
Remove the bolt, spring washer and
washer used to install the gear motor.
1
2
3
4
aqfz1n-026
Removal of LH Unit_001
1 Gear motor
2 Bolt
3 Spring washer
4 Washer
Remove the gear motor and packing.
1
2
aqfz1n-027
Removal of LH Unit_002
1 Gear motor
2 Packing
Removal of mower units #2 and #3
Remove the retaining snap pin.
Remove the round-head pin and collar
with hole.
5.
6.
7.
[1]
[2]
Main body
LM331
Main body
Page 6-13
Removal and installation of each section