Baroness LM331, Service Manual, Page: 101 / 165

When replacing the battery, follow these
steps.
Removing the Old Battery
Important
Be careful when handling the used battery as
it still contains electrical energy.
Stop the engine and remove the key.
Disconnect the negative cable.
Disconnect the positive cable.
Loosen the mounting bracket and
remove the old battery.
1
2
4jes59-009
Replacement of Battery_001
1 (-) Cable
2 (+) Cable
Installing a New Battery
Install the new battery with the correct
polarities and firmly secure the battery
with the mounting bracket.
1
4jes59-010
Replacement of Battery_002
1 Mounting bracket
Remove the protection caps attached to
the terminals of the new battery.
Firmly secure the positive cable to the
positive terminal.
1.
2.
3.
4.
1.
2.
3.
Firmly secure the negative cable to the
negative terminal.
3
2
1
4jes59-011
Replacement of Battery_003
1 (+) Cable
2 (+) Terminal
3 (-) Terminal
Battery Charge
When charging the battery with the battery
charger, follow the correct steps according to
the handling instructions attached to the
battery charger.
Danger Danger
Do not charge the battery near open flames or
in a poorly ventilated area. Keep the battery
away from lit cigarettes and other open
flames.
Failure to observe these precautions could
cause a fire or explosion.
Do not connect the charge clip to the battery
nor remove it while the power of the battery
charger is ON.
Failure to observe these precautions could
cause a fire or explosion.
If the battery charger has a changeover switch
for voltage, set the battery voltage for charge.
If the voltage for charge is wrong, it may
cause overheating or ignition of the battery
charger or explosion of the battery.
4.
Electrical system
LM331
Electrical system
Page 5-27
General inspection and repair