Baroness LM3210A, Owner'S Operating Manual, Page: 96 / 167

Remove and clean the cup, element and
float.
Replace the element with a new one
when replacement needed.
5
1
3
2
4
v1spa6-001
Cleaning of Water Separator_001
1 Float
2 Cup
3 Water drain plug
4 Element
5 Air-bleeding bolt
Install the cup, element and float in their
original positions.
Bleed air from the fuel system.
Fuel Filter
Inspection of Fuel Filter
The fuel filter works to remove foreign objects
mixed into the fuel.
When the fuel flow becomes insufficient,
replace the fuel filter if necessary.
Make sure that there is no fuel leakage.
Make sure that the fuel filter is not damaged
or dirty.
Liquid Leakage
Inspection of Liquid Leakage
Important
After approximately 50 hours of operation,
some tightened portions may be loosened and
liquid such as oil may leak.
Be sure to retighten the parts.
Repair the machine before operation if liquid
leakage found.
Ignoring leakage will cause further trouble.
Check the bottom of the machine for
leakage of liquid such as oil, water, fuel,
etc.
[3]
[4]
[5]
1.
2.
1.
Locate the leakage and identify the type of
liquid.
Bolts and Nuts
Inspection of Bolts and Nuts
Important
Be sure to retighten the bolts and nuts,
because they may be loosened at the earlier
stage of the use.
Be sure to retighten or replace before
operating the machine whenever there is any
abnormality.
Check the bolts and nuts for looseness and
coming off.
Check the bolts and nuts for cracks and
damages.
Check the bolts and nuts for rust.
Check around the bolts and nuts for traces
of rust fluid.
Check for unequal bolt length.
Check the bolts and nuts for stripped
threads and abrasion.
Inspection of Wheel Mounting Bolt
Important
Tighten the wheel mounting bolts on the
specified torque by using a torque wrench.
Be sure to retighten or replace before
operating the machine whenever there is any
abnormality.
Check the wheel mounting bolts and wheel
nuts for looseness and coming off.
Check the wheel mounting bolts and wheel
nuts for cracks and damages.
Check the wheel mounting bolts and wheel
nuts for rust.
Check around the wheel mounting bolts
and wheel nuts for traces of rust fluid.
Check the wheel mounting bolts for
unequal bolt length.
Check the wheel mounting bolts and wheel
nuts for stripped threads and abrasion.
2.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
LM3210A
Handling Instructions
Page 5-16
Inspection and Cleaning