
CR brush
Inspection of CR Brush
Note:
Depending on the specifications, this function
may not be available.
Bearing wear due to frequent use or bearing
damage caused by water infiltration may
prevent the brush from rotating smoothly.
Inspect the brush and, if necessary, replace
parts such as bearings.
Make sure that there is no abrasion nor
adhesion of the brush.
Make sure that there is no wear of the
brush shaft.
Make sure that there is no abnormality in
the brush.
Make sure that there is no play in the fit of
the bearing and the housing.
Make sure that there is no play in the brush
shaft.
Scraper
Inspection of Rear Scraper (Wire Type)
Note:
Depending on the specifications, this function
may not be available.
The operating efficiency may be reduced due
to frequent use, objects crushed during
operation, or damage during transportation.
Inspect the scraper, and replace any parts if
necessary.
Make sure that there are no breaks nor
sagging in the scraper (wire).
Make sure that there is no contact between
the scraper and roller.
Radiator Cover
Inspection of Radiator Cover
Make sure that there is no damage to the
radiator cover.
Make sure that the radiator cover is not
contaminated.
1.
2.
3.
4.
5.
1.
2.
1.
2.
Cleaning of Radiator Cover
Important
An unclean radiator cover may cause
overheating or damage to the engine.
It may also cause malfunction of the hydraulic
system.
If the radiator cover has been contaminated
with dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust
from the cover as soon as possible.
Open the radiator cover.
1
c8vn5c-008
Cleaning of Radiator Cover_001
1
Radiator cover
Carefully clean the front and back of the
radiator cover with water or compressed air.
Radiator
Inspection of Radiator
The radiator is a device for cooling the engine
along with cooling fan and reserve tank.
Clean or replace the radiator as necessary.
Make sure that there is no damage to the
radiator.
Make sure that the radiator is not
contaminated.
1.
2.
1.
2.
LM3210A
Handling Instructions
Page 5-4
Inspection and Cleaning
Summary of Contents for LM3210A
