Baroness LM3210A, Owner'S Operating Manual, Page: 108 / 167

Cutting reel pivot pins (axis bolts)
Apply 0.5 g (0.001 lb) of urea-based No. 2
grease to the cutting reel pivot pins (axis
bolts) mounted on each mower unit every
500 hours.
AB4E1CEE
Type_F_019
Pin for swiveling rear mower unit
There is one greasing point each in the
mower unit #2 and 3.
5FD8DF21
Type_F_020
12.
13.
Type_R
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
If specified locations, periods and grease are
additionally described below, follow the
instructions.
9,10
9,10
9,10
9,10
1
6
11
11
4
3
2
7
7
1
8
5
7D7A091F
Type_R_001
Location
No. of
greasing
points
1 Mower arm fulcrum 5
2 Lift arm fulcrum 5
3 Brake lever shaft 2
4 Traveling pedal shaft fulcrum 2
5 Pivot 3
6 Neutral position area 2
7 Reel housing 10
8 Rear roller 10
9 Reel motor shaft 5
10
Cutting reel pivot pins (axis
bolts)
10
11
Pin for swiveling rear mower
unit
2
LM3210A
Maintenance
Page 6-8
Greasing