Baroness LM3210A, Owner'S Operating Manual, Page: 78 / 167

When the regeneration completed, the
regeneration icon disappears.
Level 4
Danger Danger
Since it will become extremely hot around the
exhaust outlet during DPF regeneration, do
not perform the regeneration in a location
where fires may occur.
Important
When the system enters the level where DPF
regeneration is required, perform the
regeneration immediately.
Interrupting the regeneration or ignoring the
warning and continuing traveling or cutting
work may cause the engine and DPF to
malfunction.
Important
If ignoring the manual regeneration
requirement and continuing traveling or cutting
work in PM accumulation "Level 4", PM
accumulation level enters "Level 5".
If still continuing traveling or cutting work, fatal
trouble will occur on the engine and DPF.
You can not continue to use this machine
for traveling and cutting work during DPF
regeneration.
You can not perform the regeneration.
(The fault diagnostic tool is required.)
8.
￭
･
･
These are the statuses in PM
accumulation "Level 4".
1 of 2
<
NEXT
> HIDE
FMI 16
E x c e s s i v e P M 4
SPN 3701
C : 1
1 of 2
<
NEXT
>
HIDE
FMI 16
C O R R E C T I V E A C T I O N :
S t o p e n g i n e ! ! C o n t a c t
d e a l e r i m m e d i a t e l y
SPN 3701
C : 1
1
1
par1hk-007
Level 4_001
1 LED (yellow)
2 Arrow key
"Excessive PM4" appears in the monitor
display.
Pressing an arrow key changes the
display to "CORRECTIVE ACTION:
Stop engine!! Contact dealer
immediately".
The LED (yellow) lights up.
The engine output is limited at 50%.
Stop traveling and cutting work.
Park this machine in a safe location.
Apply the parking brake.
Stop the engine.
Contact your dealer for manual
regeneration.
1.
･
･
･
2.
3.
4.
5.
6.
LM3210A
Description of Functions
Page 4-42
Engine