Baroness LM3210A, Owner'S Operating Manual, Page: 88 / 167

If the oil level is low, remove the left tank
cover, and then open the tank cap and
supply oil.
1
2
dmhzyz-013
Hydraulic Oil Supply_001
1 Tank cap
2 Oil gauge
Tighten the tank cap securely.
Start the engine, raise and lower the mower
units, and turn the steering wheel left and
right.
Move forward and reverse repeatedly
several times.
Lower the mower units and maintain that
position on a level surface, and then check
to see if the oil level is at the middle of the
oil gauge. If necessary, supply oil.
Check underneath the machine for oil
leakage.
Attach the left tank cover.
Hydraulic Hoses
Inspection of Hydraulic Hoses
Warning
When checking the hydraulic circuit for
pinhole leaks or oil leakage from nozzles, do
not use your hands. Use items such as paper
or corrugated cardboard to find leakage
points.
Be extremely careful with high-pressure oil as
it may pierce your skin, resulting in personal
accidents.
If fluid is injected into the skin it must be
surgically removed within a few hours by a
doctor familiar with this form of injury or
gangrene may result.
1.
2.
3.
4.
5.
6.
Check the hydraulic hoses and pipes, and
make any necessary repairs before operating
the machine.
Make sure that there is no wear,
deterioration or damage in the hydraulic
hoses and pipes.
Make sure that there is no looseness in the
connecting portion of the hydraulic hoses
and pipes.
Check underneath the machine for
hydraulic oil leakage.
Air Cleaner
Inspection of Air Cleaner
Liners and piston rings so that the engine will
always operate smoothly.
A contaminated air cleaner element may
cause malfunction of the engine.
Clean or replace the air cleaner element as
necessary.
Make sure that there is no damage to the
air cleaner.
Make sure that the air cleaner element is
not contaminated.
Check the air cleaner contamination by
using the vacuum indicator.
If the air cleaner element is contaminated,
the vacuum indicator will display a red ring.
1
2
pd9d4r-010
Inspection of Air Cleaner_001
1 Air cleaner
2 Vacuum indicator
1.
2.
3.
1.
2.
LM3210A
Handling Instructions
Page 5-8
Inspection and Cleaning