Baroness LM3210A, Owner'S Operating Manual, Page: 85 / 167

Cleaning of Radiator
Important
An unclean radiator may cause overheating or
damage to the engine.
It may also cause malfunction of the hydraulic
system.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the radiator has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
Open the radiator cover.
Unlock the rubber catches on the left and
right of the oil cooler, and then tilt the oil
cooler.
2
1
3
2
va4j43-005
Cleaning of Radiator_001
1 Oil cooler
2 Rubber catch
3 Radiator
Carefully clean the front and back of the
radiator with water or compressed air.
1.
2.
3.
Coolant
Inspection of Coolant
Caution
Do not touch the radiator or coolant during
engine operation or immediately after the
engine has been turned off.
Otherwise, you may get burned.
Caution
Inspection should take place after the engine
has well cooled down.
Make sure that the coolant level in the reserve
tank is between "FULL" and "LOW".
If the coolant level is lower than the "LOW"
mark, supply clean water.
A
B
1
32192E88
Inspection of Coolant_001
1 Reserve tank
A Full
B Low
Handling Instructions
LM3210A
Handling Instructions
Page 5-5
Inspection and Cleaning