Baroness LM3210A, Owner'S Operating Manual, Page: 73 / 167

Stop traveling and cutting work.
Park this machine in a safe location.
Apply the parking brake.
Stop the engine.
Contact your dealer for DPF replacement.
■
In the case of "High frequency of
regeneration"
：
These are the statuses in the case of "High
frequency of regeneration".
"High frequency of regeneration" appears
in the monitor display.
Pressing an arrow key changes the
display to description of corrective action.
The LED (yellow) lights up.
The engine output is limited at 50%.
High frequency of
regeneration
SPN FMI
See Service Manual
SPN FMI
1
1
2
2
27gtuu-017
Replacement of DPF_002
1 LED (yellow)
2 Arrow key
Stop traveling and cutting work.
Park this machine in a safe location.
Apply the parking brake.
Stop the engine.
Contact your dealer for DPF replacement.
2.
3.
4.
5.
6.
1.
･
･
･
2.
3.
4.
5.
6.
Conditions for DPF Regeneration
Danger Danger
Since it will become extremely hot around the
exhaust outlet during DPF regeneration, do
not perform the regeneration in a location
where fires may occur.
Important
If DPF regeneration is interrupted before it is
completed, the next regeneration may be
requested soon since not all of the PM (soot)
was removed.
Important
Perform DPF regeneration when the engine
sufficiently warmed up.
DPF auto regeneration does not begin
unless both of the following two conditions
are met.
The DPF auto regeneration inhibit switch
is set to the "Auto regeneration mode".
(Auto regeneration inhibit icon is turned
off.)
The coolant temperature is 50 °C or
more.
DPF parked regeneration and manual
regeneration do not begin unless all of the
following five conditions are met.
The DPF auto regeneration inhibit switch
is set to the "Auto regeneration mode".
(Auto regeneration inhibit icon is turned
off.)
The parking brake is applied.
The traveling pedal is in the neutral
position.
The throttle opening is 0% (idling).
The coolant temperature is 50 °C or
more.
During DPF regeneration, the operation is
canceled if any of the following conditions
occur.
Any condition for starting regeneration is
violated.
The ignition key is switched to the "OFF"
position.
1.
･
･
2.
･
･
･
･
･
3.
･
･
Description of Functions
LM3210A
Description of Functions
Page 4-37
Engine