Baroness LM3210A, Owner'S Operating Manual, Page: 44 / 167

1 Mower unit up/down lever
A UP
B Neutral
C DOWN
Note:
When the mower units are raised, the reels stop
rotating, even if the reel rotation switch is set to
the "Rotation" position.
Throttle Knob
The throttle knob is located to the right of the
driver's seat and enables you to adjust the
engine rpm.
Move the throttle knob toward the "High speed"
position to increase the engine rpm, and toward
the "Low speed" to reduce the rpm.
A B
1
5kfhjl-009
Throttle Knob_001
1 Throttle knob
A High speed
B Low speed
Diff-Lock Switch
Note:
Depending on the specifications, this function
may not be available.
Important
Do not operate the diff-lock switch unless it is
necessary.
The diff-lock switch is located below the right
side of the steering wheel and engages the
differential lock for the left and right front wheels.
Tilt the switch lever up or down to turn "ON" to
engage the differential lock for the front wheels.
Release the switch lever to return it to the
neutral position ("OFF" position) and disengage
the differential lock.
A
A
1
B
k3y8px-002
Diff-Lock Switch_001
1 Diff-lock switch
A ON (lock)
B OFF (release)
Traveling Pedal
Caution
When the machine is traveling at a high
speed, it will not stop immediately after you
take your foot off the traveling pedal.
If necessary, also use the brake.
The traveling pedals are located in the right foot
area and control forward and reverse operation
of the machine.
When the forward pedal (inside) is depressed,
the machine travels forward. When the reverse
pedal (outside) is depressed, the machine
travels in reverse.
The speed changes in accordance with how
much the pedal is depressed.
When you take your foot off the pedal, the
machine stops automatically.
1
2
yo3h9x-002
Traveling Pedal_001
1 Forward pedal
2 Reverse pedal
LM3210A
Description of Functions
Page 4-8
Throttle Knob