Baroness LM3210A, Owner'S Operating Manual, Page: 107 / 167

Caution
Always use a hand operated grease gun and
only add a maximum of 2 pumps of grease
every 50 hours.
Using a power assisted grease gun should be
avoided.
The grease capacity inside the reel housing
on the CR brush mount side is approximately
25 g (0.05 lb).
If you repeat greasing by 2 g (0.004 lb) twelve
times for 600 hours of operation, the grease
amount inside the housing will almost reach
its full capacity.
In case that the grease exceeds its capacity,
the brush frame will project outward.
Therefore, remove the brush frame and
discard the grease inside the reel housing
when it reaches the capacity.
Reel housing side
8bq62b-386
Type_F_014
Rear roller
There is one greasing point on the left and
right of the rear roller of each mower unit.
8bq62b-180
Type_F_015
8.
Front roller
There is one greasing point on the left and
right of the front roller of each mower unit.
8bq62b-178
Type_F_016
Mower unit fulcrum
There is one greasing point on each mower
unit fulcrum.
8bq62b-177
Type_F_017
Reel motor shaft
Apply 2 g (0.004 lb) of MORI SPEED
GREASE NO.2 to the reel motor shaft
mounted on each mower unit every 250
hours.
A1595AE6
Type_F_018
9.
10.
11.
Maintenance
LM3210A
Maintenance
Page 6-7
Greasing