Baroness LM3210A, Owner'S Operating Manual, Page: 93 / 167

Engine Oil
Inspection of Engine Oil
Important
Securely tighten the oil level gauge and oil
filler cap.
Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, and then check
the oil level.
Position the machine so that the engine will
be level, and then insert the oil level gauge
all the way to check the oil level.
1
bgmiun-013
Inspection of Engine Oil_001
1 Oil gauge
The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
2
3
1
rnr453-002
Inspection of Engine Oil_002
1 Oil level gauge
2 Upper limit
3 Lower limit
1.
2.
3.
Supply of Engine Oil
Important
Do not supply too much engine oil. Otherwise,
the engine may be damaged.
Important
Do not mix different types of engine oil.
Important
Be sure to use engine oil that is classified as
JASO DH-2 or API Service Grade CJ-4, with
SAE viscosity that is appropriate for the
operating environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
If the engine oil level is lower than the lower
limit line on the oil level gauge, supply
engine oil through the oil filling port.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level
in between the upper and lower limit lines
on the oil level gauge.
Replace the oil filler cap.
1
kx9tif-006
Supply of Engine Oil_001
1 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
1.
2.
3.
Handling Instructions
LM3210A
Handling Instructions
Page 5-13
Inspection and Cleaning