Baroness LM315GG, Owner'S Operating Manual

Page: 51 / 75

1 Hour meter
2 Light switch
3 2WD/3WD selector switch
4 Up switch
5 Ignition key
6 Throttle lever
7 Water temperature gauge
8 Pilot lamp
Hour meter
The hour meter is located in the operation panel,
and indicates the accumulated operation time of
the engine.
The number in black figures on a white
background is incremented every six minutes.
The number in white figures on a black
background is incremented every hour.
1/10 wheel
…
black figures on a white
background
Hour wheel
…
white figures on a black
background
10
1
2 1
uknn6v-001
Hour meter_001
1 1/10 wheel
2 Hour wheel
Water Temperature Gauge
The water temperature gauge is located in the
operation panel.
This instrument indicates the water temperature
inside the engine.
If the water temperature gauge indicates a level
close to "H" during operation, the machine is
overheated.
Remove the load from the engine, idle the
machine for five minutes, stop the engine, and
then inspect the machine and perform any
necessary maintenance.
If the water temperature exceeds 105 degrees
Celsius, a buzzer will sound.(Intermittent tone)
1
igozke-001
Water Temperature Gauge_001
1 Water temperature gauge
Pilot Lamps
Charge Lamp
The charge lamp is the left pilot lamp located in
the operation panel.
It turns on when the ignition key is set to the
"ON" position before the engine starts. It turns
off when the engine starts and the alternator
starts operating properly.
If this lamp illuminates while you are operating
the machine, stop the engine immediately, and
then inspect the machine and perform any
necessary maintenance.
1
ifzqmc-002
Charge Lamp_001
1 Charge lamp
Thermo-start Lamp
The thermo-start lamp is the middle pilot lamp
located in the operation panel.
When the ignition key is set to the "GLOW"
position, it illuminates as the glow lamp
generates heat.
Handling Instructions
LM315GC
Handling Instructions
Page 4-31 Instruments