Baroness LM315GG, Owner'S Operating Manual

Page: 22 / 75

Inspection Before Use
Be sure to perform an inspection before you start
using the machine so that you will be able to take
advantage of its optimum performance for a long
period of time.
Reel Cutter (Cutting Cylinder) and Bed
Knife (Bottom Blade)
Inspection of Reel Cutter (Cutting Cylinder) and
Bed Knife (Bottom Blade)
The reel cutter (cutting cylinder) and bed knife
(bottom blade) may become dull due to
frequent use, objects crushed during mowing,
or damage caused during transportation.
Inspect the reel cutter (cutting cylinder) and
bed knife (bottom blade), and if necessary,
adjust the blade engagement and perform
lapping, resharpen, or replace the reel cutter
(cutting cylinder) and the bed knife (bottom
blade).
Check to see whether or not the edge of
the reel cutter (cutting cylinder) and the bed
knife (bottom blade) are too blunt to cut.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
are not cracked.
Check to see how much the reel cutter
(cutting cylinder) and the bed knife (bottom
blade) are worn.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
have not changed color due to heat from
grinding.
Check to see whether or not the second
edge face remains at the point of reel cutter
(cutting cylinder).
Make sure that the welding between the
reel cutter (cutting cylinder) and the disc
has not come off.
Radiator Cover
Inspection of Radiator Cover
Make sure that there is no damage to the
radiator cover.
Make sure that the radiator cover is not
contaminated.
1.
2.
3.
4.
5.
6.
1.
2.
Dustproof net
Inspection of Dust-proof Mesh
Make sure that there is no damage to the
dust-proof mesh.
Make sure that the dust-proof mesh is not
contaminated.
Cleaning of Dust-proof Mesh
Important
An unclean dust-proof mesh may cause
overheating or damage to the engine.
It may also cause malfunction of the hydraulic
system.
If the dust-proof mesh has been contaminated
with dust, be sure to clean it.
Especially, after operating the machine in a
dusty environment, it is important to remove
dust as soon as possible.
Pull up the dust-proof mesh.
1
c8vn5c-004
Cleaning of Dust-proof Mesh_001
1 Dust-proof mesh
Carefully clean the front and back of the
dust-proof mesh with water or compressed
air.
Radiator
Inspection of Radiator
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Make sure that there is no damage to the
radiator.
Make sure that the radiator is not
contaminated.
1.
2.
1.
2.
1.
2.
LM315GC
Handling Instructions
Page 4-2 Inspection Before Use