Baroness LM315GG, Owner'S Operating Manual

Page: 28 / 75

If the battery fluid level is lower than
halfway between the UPPER LEVEL
(maximum) line and LOWER LEVEL
(minimum) line, add purified water up to the
UPPER LEVEL (maximum) line.
U P P E R L E V E L
L O W E R L E V E L
1
2
48yhlu-006
Supply of Battery Fluid_001
1 UPPER LEVEL
2 LOWER LEVEL
Tire
Inspection of Tires
Check the pneumatic pressure of the tires.
Make sure that there are no cracks,
damage or abnormal wear.
Tire size
Pneumatic
pressure
Front wheel
Smooth 18 ×
9.50-8 2P
80 kPa
(0.8 kgf/cm
2
)
Front wheel
(Option) Pillow Dia 18 ×
8.50-8 4P
100 kPa
(1.0 kgf/cm
2
)
Rear wheel
Smooth 18 ×
9.50-8 2P
80 kPa
(0.8 kgf/cm
2
)
Brake
Inspection of Parking Brake
Make sure that the brake is not applied any
longer when you pull the parking brake
lever.
Make sure that the brake is not applied
even slightly when you press the push
button to release the parking brake lever.
1.
1.
2.
1.
2.
Belt
Inspection of Belt
Caution
If you have removed the cover during
inspection, make sure that you replace it in
the original position securely.
If the cover remains removed, the operator
may come in contact with the rotating objects
or belt, possibly resulting in injuries.
Important
A slacking or damaged belt may cause the
cutter rotation speed or operation speed to be
insufficient for operation.
Press the middle of the belt with your finger
to check the belt tension.
Make sure that there are no cracks,
damage or abnormal wear.
Engine
Inspection of Engine-Associated Parts
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Check the fuel system parts for loosened or
cracked joints and leakage. Replace the
parts if necessary.
Blow compressed air to clean any grass or
flammable materials that may be attached
inside or around the muffler.
Engine Oil
Inspection of Engine Oil
For details on handling the engine, please refer
to the separate Engine Handling Manual.
Important
Securely tighten the oil level gauge and oil
filler cap.
Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, and then check
the oil level.
1.
2.
1.
2.
1.
LM315GC
Handling Instructions
Page 4-8 Inspection Before Use