Baroness LM315GG, Owner'S Operating Manual

Page: 30 / 75

Important
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
Change the engine oil more frequently if the
engine oil is contaminated and, especially, if
you use the machine in dusty areas or operate
the engine at high loads or in high
temperatures.
Move the machine onto a level surface,
stop the engine, remove the drain plug
while the engine oil is warm, and then drain
the oil into a bowl.
Replace the drain plug in the engine.
1
gui678-011
Change of Engine Oil_001
1 Drain plug
Through the oil filler cap, supply new
engine oil until the oil reaches a level in
between the upper and lower limit lines on
the oil level gauge.
Engine oil quantity is approximately 2.8 dm
3
(2.8 L).
1.
2.
3.
Replace the oil filler cap.
1
kx9ti-004
Change of Engine Oil_002
1 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after filling the oil.
Fuel
Inspection of Fuel Quantity
With the machine on a level surface, observe
the fuel gauge on the fuel tank to check the
fuel level.
1
guc5f6-007
Inspection of Fuel Quantity_001
1 Fuel gauge
Fuel Supply
Danger Danger
Do not supply fuel above F (FULL) level of
the fuel gauge.
If you supply too much fuel, it might overflow
from the fuel cap when you travel or work on
a slope.
4.
5.
LM315GC
Handling Instructions
Page 4-10 Inspection Before Use