Baroness LM315GG, Owner'S Operating Manual

Page: 42 / 75

Turn "OFF" the reel rotation switch.
1
B
A
mh4pyw-006
Procedure to Start Engine_002
1 Reel rotation switch
A ON
B OFF
Make sure that the traveling pedal is in
neutral position.
Shift the throttle lever halfway from the
"Low" to "High" position.
Important
The thermo-start lamp turns off at the
specified time. However, the lamp turning off
is not related to the glow plug generating
heat.
If the ignition key is left in the "GLOW"
position after the lamp is turned off, the plug
will still generate heat.
The lamp will stay illuminated for five
seconds.
Switch the ignition key to the "GLOW"
position.
1
A
B
C
D
v2e27i-010
Procedure to Start Engine_003
1 Ignition key
A OFF
B ON
C GLOW
D START
4.
5.
6.
7.
Make sure that the glow plug is generating
heat and the thermo-start lamp is turned on.
1 2 3
v2e27i-011
Procedure to Start Engine_004
1 Charge lamp
2 Thermo-start lamp
3 Oil pressure lamp
Caution
Quickly returning the ignition key from the
"START" position to the "ON" position may
result in damage to the machine.
After the thermo-start lamp turns off,
immediately set the ignition key to the
"START" position.
When the starter starts rotating and the
engine starts, return the ignition key to the
"ON" position slowly.
Make sure that the charge lamp and engine
oil pressure lamp turn off.
If they do not turn off, stop the engine and
inspect the machine.
Shift the throttle lever to "Low" position, and
then warm up the engine for 1 to 2 minutes.
Gradually move the throttle lever to "High"
position.
Procedure to Stop Engine
Set the traveling pedal to the neutral
position.
Pull the parking brake lever.
Turn "OFF" the reel rotation switch.
Move the throttle lever to "Low", and
continue idling for 1 to 2 minutes.
Switch the ignition key to the "OFF"
position.
Make sure that the engine has stopped.
Remove the ignition key.
Leave the driver's seat.
8.
9.
10.
11.
12.
13.
1.
2.
3.
4.
5.
6.
7.
8.
LM315GC
Handling Instructions
Page 4-22 Procedure to Start / Stop Engine