Baroness LM315GG, Owner'S Operating Manual

Page: 26 / 75

Wind new sealing tape on the drain plug,
and then attach it to the hydraulic tank.
2
1
pfdche-007
Change of Hydraulic Oil_001
1 Hydraulic tank
2 Drain plug
Remove the tank cap, pour new oil from the
fill port until the oil level reaches the middle
of the oil gauge on the hydraulic tank, then
replace the tank cap.
The hydraulic tank capacity is
approximately 16.0 dm
3
(16.0 L).
1
2
dmhzyz-009
Change of Hydraulic Oil_002
1 Tank cap
2 Oil gauge
Start the engine, raise and lower the mower
units, and turn the steering wheel left and
right.
Move forward and reverse repeatedly
several times.
Raise the mower units and maintain that
position on a level surface, and then check
to see if the oil level is at the middle of the
oil gauge. If necessary, supply oil.
Check underneath the machine for oil
leakage.
[3]
2.
3.
4.
5.
Air Cleaner
Inspection of Air Cleaner
For details on handling the engine, please refer
to the separate Engine Handling Manual.
The air cleaner is a component that removes
dirt from the intake air to prevent wear of the
cylinder liners and piston rings so that the
engine will always operate smoothly.
A contaminated air cleaner element may cause
malfunction of the engine.
Make sure that there is no damage to the
air cleaner.
Make sure that the air cleaner element is
not contaminated.
1
2
3
4
yt4sup-005
Inspection of Air Cleaner_001
1 Air cleaner element
2 Clip
3 Air cleaner cap
4 Air cleaner body
Cleaning of Air Cleaner
For details on handling the engine, please refer
to the separate Engine Handling Manual.
A contaminated air cleaner element may cause
malfunction of the engine.
To maximize the life of the engine, clean the air
cleaner properly.
Follow the steps below to clean the air
cleaner.
Remove the clips from the two locations
and remove the air cleaner cap.
Remove the air cleaner element.
While paying close attention not to
damage the air cleaner element, tap a
solid portion of the air cleaner element or
blow compressed air from its inside to
remove dust and dirt.
Attach the air cleaner element to the air
cleaner body.
1.
2.
1.
[1]
[2]
[3]
[4]
LM315GC
Handling Instructions
Page 4-6 Inspection Before Use