Baroness LM315GG, Owner'S Operating Manual

Page: 49 / 75

LAP
The reel cutter (cutting cylinder) rotates in a
speed suitable for the back lapping and its
maintainability increases.(The rotation
direction is not changed, so use the reel
reverse lever of the mower unit to reverse
the rotation).
Traveling Pedal
Warning
This machine is not authorized as a special
motor vehicle. Do not drive it on public roads.
Caution
When the machine is traveling at a high
speed, it will not stop immediately after you
take your foot off the traveling pedal.
Important
When the reel rotation switch is turned "ON,"
the working speed is limited by the pedal
stopper.
The traveling pedals are located in the right foot
area and control forward and reverse operation
of the machine.
When the forward pedal (front side) is
depressed, the machine travels forward. When
the reverse pedal (rear side) is depressed, the
machine travels backward.
The speed changes in accordance with how
much the pedal is depressed.
When you take your foot off the pedal, the
machine stops automatically.
1
2
yo3h9x-006
Traveling Pedal_001
1 Forward pedal
2 Reverse pedal
3.
Parking Brake Lever
Caution
Be sure to release the parking brake before
driving.
Otherwise, it may cause the malfunction of
the brake or hydraulic system.
Caution
Never park the machine on a slope.
The parking brake lever is located at the left of
the driver's seat.
To park the machine, pull the parking brake
lever completely.
To release the parking brake, press the push
button while lowering the parking brake lever all
the way to its resting position.
If the traveling pedal is depressed while the
parking brake is applied, a buzzer will sound.
(intermittent tone)
1
n9dmld-005
Parking Brake Lever_001
1 Parking brake lever
Hood
Caution
Do not open the hood in strong winds.
Caution
Be careful not to pinch your fingers when you
open or close the hood.
Unlock the bolt, and then lift up the hood. 1.
Handling Instructions
LM315GC
Handling Instructions
Page 4-29 Operation of Each Section