Baroness LM315GG, Owner'S Operating Manual

Page: 29 / 75

Position the machine so that the engine will
be level, then insert the oil level gauge all
the way to check the oil level.
1
bgmiun-010
Inspection of Engine Oil_001
1 Oil level gauge
The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
2 3
1
rnr453-004
Inspection of Engine Oil_002
1 Oil level gauge
2 Upper limit
3 Lower limit
Filling of Engine Oil
For details on handling the engine, please refer
to the separate Engine Handling Manual.
Important
Do not fill too much engine oil. Otherwise, the
engine may be damaged.
Important
Do not mix different types of engine oil.
2.
3.
Important
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
Engine oil is supplied through the oil filler
cap.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level
in between the upper and lower limit lines
on the oil level gauge.
Replace the oil filler cap.
1
kx9ti-004
Filling of Engine Oil_001
1 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after filling the oil.
Change of Engine Oil
For details on handling the engine, please refer
to the separate Engine Handling Manual.
Warning
When you change the engine oil, be sure to
drain it into a bowl and discard it in
accordance with local laws and regulations.
Caution
Be careful with hot oil, which could cause
burns if it contacts your skin.
1.
2.
3.
Handling Instructions
LM315GC
Handling Instructions
Page 4-9 Inspection Before Use