Barco R92112011, User Manual

Page: 69 / 210

7. Advanced
Image 7-27
• Color space : allows to select between 5 different color spaces
- RGB
- ITU_BT_709
- SMPTE_240M
- ITU_BT_601
- EBU
• Clamp position : allows to set the clamp pulse position in the clamping circuit
• Clamp width : allows to set the width of clamp pulse in the clamping circuit
It is recommended to use the default values.
Advanced settings for Digital Data sources (DVI)
The advanced button enables the advanced settings for digital data sources.
Image 7-28
UsePictureBox can be disabled ( 0 ) or enabled ( 1 ). By default, it is disabled which means that only few timings can be changed. In
case of a DVI source this is not a problem.
In very speci fi c situations however (e.g. iBlend), more changes to the timings may be needed, such as the setting of the Start pixels,
Active pixels, Start lines, Active lines . In that case, hit Enter and change the slider to position 1 , thus enabling more settings in the
Edit fi le menu.
Image 7-29
7.4.4 Save as (create a custom fi le)
Creating a custom fi le
When the loaded fi le is a standard fi le there is a possibility of saving it as a custom fi le (= creating a custom fi le) , this is done with
the save as function. The saved fi le will always be a custom fi le (saved in the custom directory)
For sources that are often used, a custom fi le should be created. This custom fi le will then be loaded auto-
matically and will prevent the Auto Image from being launched.
How to save a fi le ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Save as...
R59770066 SIM 7Q SERIES 08/12/2014 65