Barco R92112011, User Manual

Page: 170 / 210

8. Maintenance
2. Clean the housing of the projector with a damp cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution.
8.3 Air fi lter replacement
C
AUTION
:
Extreme care must be taken to avoid dust intrusion in or dust infection of the projector.
W
ARNING
:
The air fi lters must always be present and mounted in a correct way!
Description
Two air fi lters are used to prevent dust from entering the projector. These air fi lters must be checked and replaced on a regular
basis , depending on the environment conditions of the projector.
x-cube air filter
electronics air filter
Image 8-1
Air
fi lters: location
A good practice in a clean environment is to check/replace both air fi lters on each lamp replacement . In dusty conditions, the air
fi lters must be checked at least once a month .
The two different air fi lters used in this projector are:
• x–cube air fi lter: fi lter with a thicker seal
Image 8-2
x-cube air
fi lter (thicker seal)
166 R59770066 SIM 7Q SERIES 08/12/2014