Barco R92112011, User Manual

Page: 108 / 210

7. Advanced
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset
7. Press ENTER
A dialog box is displayed
Image 7-101
8. Use ← or → , the numeric keys on the remote, or the keypad to enter the serial number of the new lamp (serial number 000000
will not be accepted).
7.6.5 Lamp power mode (only for SIM 7Q & SIM 7Q HC)
Description
The lamp can be set to Normal or Economic mode:
• Normal : full lamp power of 280W is set (generation 2 lamp)
• Economic : the lamp power is reduced to 250W (generation 2 lamp) and the light output is decreasing accordingly.
SIM 7Q HB & SIM 7Q HB&C only run in Normal lamp power mode and have no Economic lamp power mode
available.
C
AUTION
:
Switching between Normal lamp mode and Economic lamp mode can only be done 6 times and
only within the fi rst 100 hours of the lamp life! On each switch a dialog box indicates the actual amount of
performed lamp power mode switches and asks for con fi rmation.
Once the lamp life time has exceeded 100 hours, the menu will be disabled.
How to set the lamp power mode ?
1. In the OSD, browser to Lamps > Lamp power mode > Normal or Economic .
Image 7-102
2. Press ENTER to con fi rm.
104 R59770066 SIM 7Q SERIES 08/12/2014