Barco R92112011, User Manual

Page: 36 / 210

4. Installation
DHCP
DHCP setting:
•
Yes : The projector will dynamically obtain its IP address from the DHCP server.
• No : The IP address needs to be entered manually. Note that when selecting Fixed IP
the IP settings fi elds are enabled
IP Address Fixed IP Address of the projector : this fi eld can be edited when Fixed IP is selected
Subnet Mask Subnet Mask : this fi eld can be edited when Fixed IP is selected
Gateway Gateway : this fi eld can be edited when Fixed IP is selected
Hostname Hostname : this fi eld can be edited when DHCP is selected
How to set up the network settings ?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Installation in the menu bar.
3. Push the ↓ key to pull down the Installation menu.
4. Push the cursor key ↑ or ↓ to highlight Network settings and press ENTER to select.
Image 4-38
A dialog box will be displayed.
Image 4-39
5. Push the cursor key ↑ or ↓ to highlight the desired parameter.
6. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values.
32 R59770066 SIM 7Q SERIES 08/12/2014